landing_space/distance_estimation/spray_pesticide.py

import cv2
from cv2 import aruco
import numpy as np
import time
import sys
import os
sys.path.append(os.path.abspath(os.path.join(os.path.dirname(__file__), '..')))
from default_config import *
visualization = True
def is_in_center(x_px, y_px, frame_w, frame_h, margin_ratio=0.25):
    margin_x = frame_w * margin_ratio
    margin_y = frame_h * margin_ratio
    return (margin_x < x_px < frame_w - margin_x) and (margin_y < y_px < frame_h - margin_y)

def get_euler_angles_from_rvec(rvec):
    rot_matrix, _ = cv2.Rodrigues(rvec)
    sy = np.sqrt(rot_matrix[0, 0]**2 + rot_matrix[1, 0]**2)
    singular = sy < 1e-6
    if not singular:
        roll = np.arctan2(rot_matrix[2, 1], rot_matrix[2, 2])
        pitch = np.arctan2(-rot_matrix[2, 0], sy)
        yaw = np.arctan2(rot_matrix[1, 0], rot_matrix[0, 0])
    else:
        roll = np.arctan2(-rot_matrix[1, 2], rot_matrix[1, 1])
        pitch = np.arctan2(-rot_matrix[2, 0], sy)
        yaw = 0
    return np.degrees(roll), np.degrees(pitch), np.degrees(yaw)

def is_roll_valid(roll):
    return (abs(roll) < ALLOWED_ANGLE_DEG) or (160 <= abs(roll) <= 180)

def spray_pesticide(marker_id):
    print(f"✅ SPRAYING! Marker ID: {marker_id}")

calib_data_path = f"camera_calibration/calib_data/{set_resolution}/MultiMatrix.npz"
calib_data = np.load(calib_data_path)
print('resolution:', set_resolution)

cam_mat = calib_data["camMatrix"]
dist_coef = calib_data["distCoef"]


marker_dict = aruco.getPredefinedDictionary(aruco.DICT_7X7_50)
param_markers = aruco.DetectorParameters()

cap = cv2.VideoCapture(0)

# Thay đổi độ phân giải phù hợp với yêu cầu ban đầu
new_height = RESOLUTION_STANDARDS[set_resolution]
new_width, new_height = change_resolution(cap,new_height)    
print(f'Resolution camera {new_width}x{new_height}')

fps = cap.get(cv2.CAP_PROP_FPS)
print(f"Frames per second: {fps}")



def start_spraying(marker_id):
    print(f"🟡 SPRAYING marker {marker_id}...")

def stop_spraying(marker_id):
    print(f"✅ SPRAYED marker {marker_id}")

# --- Track state ---
marker_states = {}  # marker_id -> {"state": "NOT_SPRAYED"/"SPRAYING"/"SPRAYED", "start_time": float}

while True:
    ret, frame = cap.read()
    if not ret:
        break

    gray_frame = cv2.cvtColor(frame, cv2.COLOR_BGR2GRAY)
    detector = cv2.aruco.ArucoDetector(marker_dict, param_markers)
    marker_corners, marker_IDs, _ = detector.detectMarkers(gray_frame)

    current_time = time.time()

    if marker_corners:
        rVec, tVec, _ = aruco.estimatePoseSingleMarkers(marker_corners, MARKER_SIZE, cam_mat, dist_coef)
        for i, (ids, corners) in enumerate(zip(marker_IDs, marker_corners)):
            marker_id = int(ids[0])
            corners = corners.reshape(4, 2).astype(int)
            cx = int(np.mean(corners[:, 0]))
            cy = int(np.mean(corners[:, 1]))
            x, y, z = tVec[i][0]
            roll, pitch, yaw = get_euler_angles_from_rvec(rVec[i])

            # Kiểm tra đủ điều kiện
            in_center = is_in_center(cx, cy, new_width, new_height)
            within_angle = is_roll_valid(roll)
            within_xyz = (
                ALLOWED_XYZ_RANGE["x"][0] <= x <= ALLOWED_XYZ_RANGE["x"][1] and
                ALLOWED_XYZ_RANGE["y"][0] <= y <= ALLOWED_XYZ_RANGE["y"][1] and
                ALLOWED_XYZ_RANGE["z"][0] <= z <= ALLOWED_XYZ_RANGE["z"][1]
            )

            if marker_id not in marker_states:
                marker_states[marker_id] = {"state": "NOT_SPRAYED", "start_time": 0}

            state_info = marker_states[marker_id]

            if in_center and within_angle and within_xyz:
                if state_info["state"] == "NOT_SPRAYED":
                    start_spraying(marker_id)
                    marker_states[marker_id] = {
                        "state": "SPRAYING",
                        "start_time": current_time
                    }
                elif state_info["state"] == "SPRAYING":
                    elapsed = current_time - state_info["start_time"]
                    if elapsed >= SPRAY_DURATION:
                        stop_spraying(marker_id)
                        marker_states[marker_id]["state"] = "SPRAYED"

            # --- Visualization ---
            status = marker_states[marker_id]["state"]
            color = {"NOT_SPRAYED": (0, 0, 255), "SPRAYING": (0, 255, 255), "SPRAYED": (0, 255, 0)}[status]

            if visualization:
                cv2.polylines(frame, [corners], True, color, 2)
                cv2.drawFrameAxes(frame, cam_mat, dist_coef, rVec[i], tVec[i], 4, 4)
                cv2.putText(frame, f"ID: {marker_id}", (cx + 10, cy), cv2.FONT_HERSHEY_SIMPLEX, 0.6, color, 2)
                cv2.putText(frame, f"{status}", (cx + 10, cy + 25), cv2.FONT_HERSHEY_SIMPLEX, 0.6, color, 2)
                cv2.putText(frame, f"x:{x:.1f} y:{y:.1f} z:{z:.1f}", (cx + 10, cy + 45), cv2.FONT_HERSHEY_PLAIN, 1, (255, 255, 255), 1)
                cv2.putText(frame, f"roll:{roll:.1f} pitch:{pitch:.1f} yaw:{yaw:.1f}", (cx + 10, cy + 65), cv2.FONT_HERSHEY_PLAIN, 1, (0, 255, 255), 1)
    if visualization:
        cv2.imshow("frame", frame)
        key = cv2.waitKey(1)
        if key == ord("q"):
            break

cap.release()
cv2.destroyAllWindows()